MV-7 Breathable Membrane (Rectangle)

0

All ePTFE membrane construction without backing material

MV-7 Breathable Membrane (Rectangle)

MicroVENT


Characteristics of the membrane:

All ePTFE membrane construction without backing material

Membrane Characteristics: Hydrophobic and Oleophobic

AATCC 118 Oil Rating: 6

Water entry pressure: ≥0.35bar/60s ;

Airflow: ≥130ml/cm²/min at 70mbar;

Membrane type :MV-2FB-20

Membrane material :PTFE 100%

Operating Temperature: -40℃ to125℃


Suggestion for install:

Install to the inner wall of housing shell. The bonding strength of the membrane silicon to the shell is determined by housing material, surface treatment and avoid contamination during the membrane's removement and installation. For more install information please contact our sales engineer.


Items of the products:

Part numberInner & outer Diameter/BXA(bxa)Standard airflow L/h ,
at70mbar
Numbers of
each line
Volume of
each roll
Width of the backing
material/mm
MV-70307Φ3XΦ7≥0.6910000pcs95
MV-70308Φ3.3XΦ7.6≥0.7910000pcs95
MV-70510Φ5.5XΦ10.2≥1.975000pcs95
MV-70712Φ7.1XΦ12.7≥3.165000pcs95
MV-70814Φ8XΦ14≥3.955000pcs95
MV-70919Φ8.9XΦ19.1≥4.945000pcs95
MV-71221Φ12.5XΦ21.5≥9.635000pcs95
MV-72029Φ20XΦ29≥24.535000pcs95
MV-7163816X38(7X29)≥15.842000pcs95
MV-7203019.5X30(9.5X20)≥14.842000pcs95
MV-7204019.5X40(9.5X30)≥22.242000pcs95
MV-7205119.5X51(9.5X41)≥3242000pcs95
MV-7282828x28(16.5X16.5)≥2132000pcs95

MicroVENT

Note:

The adhesion property of Microvent membrane is determined by the way used to paste the membrane to shell surface of products after the membrane is removed from the film. The related factors include design, seal and install technics ; Microvent would provide suggestion and guidance based on previous experience. However, it is the customer's duty to test the suitability and usability of the vents when it applicated in products.To choose a Microvent venting membrane for your specific product, please contact our sells stuff. The above information is subject to change without prior notice.

Series MV-7 Waterproof Venting Membrane